Leading Manufacturer for PA/VA System

www.dsppatech.com

Search

IP SOS Terminal with Amplifier

MAG6408 IP Network SOS Terminal with Amplifier(Column type)
Can realize outdoor help alarm interactive system with the network system via network for the signal transmission medium...

Send Inquiry Chat Now

Features
Can realize outdoor help alarm interactive system with the network system via network for the signal transmission medium
Use unicast technology, point-to-point transmission, greatly enhanced the reliability
The host can be compatible with different functions of the terminal and make different responses for each terminal’s different requests; easy to realize personalized service
Outdoor emergency terminal with warning lights, status lights, MIC, speaker and help buttons, easy to find the terminal and operate in emergency
Outdoor emergency terminal with outdoor waterproof function
Outdoor emergency terminal language prompt function
Can configure the quantity of alarm microphones according to the actual needs
With external active speaker or headset, the alarm microphone can able to talk with outdoor emergency terminals
Dual network interface redundant design, can work across the network segment
Can be attached to any place where the network arrives
Built-in speaker and microphone, with intercom function
Support maximum 48kHz sampling rate 16bit digital audio stream decoding
Built-in 2 × 25W or 1 × 50W high-fidelity digital amplifier, low power setting
With 1-channel AUX audio input/output, 2-channel MIC input and 1-channel EMC emergency output, 1-channel short circuit output

Description
IP Network Column Alarm Terminal MAG6408 is the network of all-digital analog signal processor based on TCP / IP transmission protocol, meanwhile the network for the signal transmission medium, with the network system to achieve outdoor help alarm interactive system. Dual network redundancy design can be attached to any place where the network can reach. Applicable to schools, banks and urban security and other areas with broadcast needs.

Specification

Index Item

Index

AUX IN

Input Sensitivity

1000 mV

Frequency

20Hz-20kHz

Distortion

0.2%

Noise

1mV

SNR

≥80 dB

AUX OUT

Output Sensitivity

1000mV

Frequency

50Hz-20kHz

Distortion

0.1%

Noise

0.4 mV

SNR

≥75dB

Maximum output power of built-in amplifier

Independent channel mode

25W/4Ω

BTL mode

50W/8Ω

Built-in amplifier maximum harmonic distortion

0.3%

Built-in speaker

2W

MIC input

Input Sensitivity

10 mV

Frequency

100Hz-20kHz

Distortion

1%

Noise

3mV

SNR

≥65 dB

Supply voltage range

180-240V/50Hz

Protection(Over-current/Heat/Over-voltage/Under-voltage)

support

Packing Size(L×W×H mm)

500×480×2000

Device Size(L×W×H mm)

420×400×1910

Net weight(KG)

24.5

Related Products