Leading Manufacturer for PA/VA System

www.dsppatech.com

Search

120W Mixer Amplifier

MP300PIII 120W Mixer Amplifier With 3 Mic & 2 AUX Inputs
70V, 100V & 4-16 Ω, rated power 120W
3 microphone inputs, Mic 1 with priority and muting function
2 aux line input &1 line output for additional mixer or amplifier link...

Send Inquiry Chat Now

Features

l  Three microphone inputs, two auxiliary inputs, and one AUX output for link.

l  Transformer for the speaker outputs at 100V, 70V and P1.

l  Muting function.

l  Individual volume control.

l  Low and high tone control.
l  A five-element LED level meter is provided for the quick and easy visual monitoring of sound level.

l  The protection and alarm in case of output short-circuit.


Description

MP300PIII mixer amplifier is rated at 120W. It has 3 microphone inputs and 2 aux inputs, and Mic 1 is provided with priority and muting function. Bass and treble controls and master volume control are provided. Complete protection includes short circuit and thermal protection, current limiter and overloading.

This amplifier can be applied to different cases, such as supermarket, classroom, etc.


Specification:

Model

MP200PIII

MP300PIII

MP600PIII

MP1000PIII

Rated output power

60W

120W

250W

350W

Output regulation

≤3dB (from off-load to full load) 

Speaker output

P1, 70V, 100V

AUX output

≥700 mV

Input sensitivity

Microphone :≤3.3mV (unbalanced)  

Line:≤300mV (unbalanced) 

Frequency response

80Hz-16KHz (±3dB)   

Distortion

≤1% 1KHznormal   operating status

S/N   Ratio

Line: ≥74dB

Tone

Bass : ±10dB(100Hz)    

Treble : ±10dB(10kHz)  

Protection

AC fuse; DC voltage; overload; short-circuit.

Muting function

Mic 1 overrides other input signals with

0-( -30 )dB attenuation

Power requirements

AC 220V/50Hz

Rated power consumption

120W

250W

500W

650W

Outer Packing Size (mm)

(L×W×H) 520×430×195

Unit Size (mm)

(L×W×H) 420×338×88

Gross weight

10.3kg

10.8kg

14.8kg

15.2kg

Net weight

8.5kg

9kg

13kg

13.4kg


PRECAUTION OF INSTALLATIOM

1. Do not block ventilation holes.

2. The amplifier should not be placed in any of the areas:

1) with poor ventilation;

2) exposed to direct sunlight;

3) with high ambient temperature or adjacent to heat-generating

equipment;

4) with high humidity or heavy dust;

5) susceptible to vibration.

3. Make sure the power outlet conforms to the plug of the unit.

4. Do not use this unit if the electrical power cord is frayed or broken.

Always operate the unit with the AC ground wire connected to the

electrical system’s ground.

5. If an alarm rings after the power has been on and the signal has been

fed, there must be an of output short-circuit trouble. In a such case,

please turn the power off. Do not turn on the power again, until the

trouble shall be resol


Related Products