Leading Manufacturer for PA/VA System

www.dsppatech.com

Search

Cheap PA Amplifier

MP200P Series Mixing Amplifier with 3 Mic&2 AUX Inputs
70V/100V/4-16 Ω, rated power 60W/120W/250W/350W
3 Mic inputs, Mic 1 with priority and muting function
2 aux line input &1 line output for additional mixer or amplifier link...

Send Inquiry Chat Now

Features

70V/100V/4-16 Ω, rated power 60W/120W/250W/350W

3 Mic inputs, Mic 1 with priority and muting function

2 aux line input &1 line output for additional mixer or amplifier link

Individual volume control for each microphone and line input

Bass and treble control.


Description

MP600PIII mixer amplifier is rated at 250W. It has 3 microphone inputs and 2 aux inputs, and Mic 1 is provided with priority and muting function. Bass and treble controls and master volume control are provided. Complete protection includes short circuit and thermal protection, current limiter and overloading.

This amplifier can be applied to different cases, such as supermarket, classroom, etc.


Specification

Model

MP200PIII/MP300PIII/MP600PIII/MP10100PIII

Rated output

60W/120W/250W/350W

Speaker output

70V, 100V & 4-16 Ω,

Input sensitivity

Mic2,3 : 600Ω, ≤3mV, unbalanced ;AUX1,2,MIC1 : 10kΩ, ≤300mV

Frequency response

50Hz -16kHz (±3dB)

Distortion

< 1% at 1kHz , 1/3rated output voltage

The ratio of signal to noise

Mic1,2 and 3 : >75dB ;AUX1 and 2 : > 80dB

Protection

AC fuse; DC voltage; overload; short-circuit.

Power requirements

AC 220V-240V/50Hz-60Hz

Power consumption

120W/250W/500W/650W

Outer Packing Size (mm)

(L×W×H)520×430×195

Unit Size (mm)

(L×W×H)420×338×88

Gross weight

10.3kg

Net weight

8.5kg


FRONT PANEL

image005.jpg

image003.jpg


1 LED power indicator  6 Mic volume control

For main power. Adjust microphone volume.

2 LED level meter  7 AUX volume control

Indicate output level.  Adjust AUX input volume.

3 Power switch   Mic 1 input jack

For main power.  Connect to microphone of unbalanced

4 Bass control  30~600Ω with 1/4″phone plug.

Adjust bass response.  The muting function is activated

5 Treble control  while the signal is sent to Mic 1.

Adjust treble response.


Note:

When all the five elements of the LED level meter remain lit, it indicates that the sound is distorted. In such a case, adjust each volume controlling button, until LED element 4 (+8dB) and LED element 5 (+10dB) shall flash.


REAR PANEL

image008.jpg

image006.jpg


1 AC fuse    4 AUX 1 input & AUX 2 input

Prevent the excessive AC current flow.  Connect to auxiliary source equipment.

2 AC power connector   5 AUX output

Connect to AC power source.  Connect to amplifier.

3 Mic 2 input & Mic 3 input    6 Output terminals

Connect to the microphones at unbalanced   Connect to speakers.

30~600 Ω with 1/4″phone plug.    7 Mute control

The signals from Mic 2 and Mic 3 will   Adjust muting function.

be muted by the signal from Mic1.


Note:

When connecting to speakers, use one pair of speaker output terminals only.


Connections

TIM截图20180423143014.jpg


Related Products