SiP Intercom Phone Model:DSP9315 ● Simple and fashionable appearance; ● Cost-effective price and green environment protection concept; ● Simple installation and configuration; ● Support 100 Mbps Ethernet - adaptive 10/100 Mbps network port, with high-speed transmission and PoE power supply; ● High Compatibility - Compatible with SIP-based IP PBX/Softswitch/IMS platforms, such as Asterisk, Broadsoft, 3CX, Elastix, Zycoo, etc.
1 and 4 Channel IP Network Audio Decoder Model:DSP9131 DSP9134 ● Based on TCP/IP protocol networked multifunctional front player; it works across network segments. ● Support SIP 2.0 (RFC3261) and related RFC. ● Broadband ADC/DAC 16KHz sampling; narrowband programming: G.711a/u; Broadband programming :G.722. ● Built in independent IP control module and audio input module, independent decoding can be realized. ● Single channel model (DSP9131) and four channel (DSP9134). ● Support loop detection (single channel model). ● Support energy saving mode (single channel model), when the audio signal is not input, the power amplifier can be used for standby energy saving. ● Separate from network and host. ● Built in large capacity memory, built-in program source with timing function. ● Support audio format：MP3, WMA, WAV, FL AC, APE, AAC, OGG, M4A etc. ● External audio input.
2 and 4 Channels IP Network Audio Adapter Model:DSP9122 DSP9124 ● Built-in independent control module, stereo sound source real-time acquisition ● Each module can run at the same time and they do not interfere with each other ● 2 or 4 optional audio channel models. ●The name of each channel input is defined by the management software ● 10 / 100M adaptive, support DHCP / IP settings, support for LAN and WAN ●1U design, small-sized and lighter-weighted; anodized aluminum alloy panel, beautiful and durable.
POE Stereo IP Network Terminal With Amplifier Model:DSP9136E ● Based on TCP / IP protocol, multi-function pre-player，can work across the network segment. ● Support separated running form host and network. ● Audio source: AUX stereo input, 100V pressure input, MIC, network audio, built-in source. ● Support large capacity storage, built-in program source. ● Audio format:：MP3，WMA，WAV，FLAC，APE, etc. ● MIC sensitivity adjustable, with whistle suppression, echo removal technology. ● Support remote one-button paging and intercom ● With timing function & support offline working ● Multiple control interface: I/O PORT input & output, RS485 ● Can play the BGM, emergency paging and alarming signal form the host ● Support SIP standard protocol, can realize the two-way intercom via VOIP telephone ● Support control and play by management software
IP Network Fire Alarm Terminal Model:DSP9102 ● Support 32 fire alarm signal access, support short circuit and 12V-24V signal. ● 32-way independent control, support adjacent zone alarm. ● The forced activation area may be limited to the accident zone and may be extended to several adjacent zones, which are pre-programmed by the networked host. ● You can customize the alarm to play the sound through the management software. ● The same system can have multiple devices connected to the network; control area can be extended. ● 10 / 100M adaptive, support DHCP / static IP, support LAN and WAN. ● 32-way signal indicator on the panel shows the working status. ● 1U size, space-saving and lighter-weight; anodized aluminum alloy panel, good- looking and durable.