Leading Manufacturer for PA/VA System

www.dsppatech.com

E-mail: info@dsppa.com

Search

10W Fireproof PA Speaker

DSP3254EN 10W Fireproof PA Speaker
Built-in 100v transformer
In-ceiling type loudspeaker
6.5” paper cone waterproof driver
Rate power 10W with optional power taps

Send Inquiry Chat Now

Features
Built-in 100v transformer
In-ceiling type loudspeaker
6.5” paper cone waterproof driver
Rate power 10W with optional power taps
High-class steel and form by stamping
Leaded wire case and ceramic terminals for fireproofing
Comply with EN54-24 requirements


Description
The DSP3254EN is a ceiling speaker designed for voice evacuation systems, which comply with EN54-24 requirements. It has a 100v transformer built in. The 100v transmission is realized in a high-voltage, low-current mode, which makes longer distance transmission and parallel connection of multiple loudspeakers possible.
The built-in 6.5” speaker driver is designed of wide frequency response (90-20,000Hz), the multiple terminals 2.5W-10W can be applied to different occasions vary in area sizes and background noises; It is made of high-class steel and fixed by stamping, which ensures long-term durability, and will never be out of shape; Equipped with leaded wire case which is hard to burn for fireproofing; Spring clip clamp makes the easy and secure installation possible; Driver surround excellent damping, long life, clear and sonorous sounds.
It is an ideal choice for industrial and commercial applications in hotel, school, office and factory where background music and paging is needed.


Specification

MODEL

DSP3254EN

FULL-RANGE

6.5"

RATED POWER

10W

LINE INPUT

100V

SENSITIVITY(1M,1W)

91.7±2dB

MAX SPL(1M)

101.7±2dB

FREQ. RESPONSE

90-20,000Hz

CUTOUT SIZE

Ø185 - Ø200mm

DEMENSIONS(H x W x L)

141 x Ø211mm

WEIGHT

1.6kg


Performance

FREQ. RESPONS
Measures on panel: IEC standard SPLMAX 4m

DISTORTION
Impedance vs different power taps: 10W - 5W - 2,5W

11.jpg

22.jpg


Dimension

33.png

Installation
1. Cut a Ø185mm - Ø200mm installation hole on ceiling as shown above;
2. Adjust the clamps of the speaker system for different ply of ceiling;
3. Connect audio broadcasting wire to the terminals according to the table below;

44.jpg

4. Turn up the clamps of the speaker and insert them into the installation hole on ceiling and then release them as shown below; Putting on your gloves for safety is recommended.

55.jpg

5. Finally, examine whether it is steady.


Related Products