Leading Manufacturer for PA/VA System

www.dsppatech.com

E-mail: info@dsppa.com

Search

IP Network Audio Display Terminal

MAG6402 IP Network Audio Display Terminal
Touch panel control, luxurious design, TFT true color screen display
Equipped with the basic operation function of the host, including sound source choosing and etc...

Send Inquiry Chat Now

Features
Touch panel control, luxurious design, TFT true color screen display
Equipped with the basic operation function of the host, including sound source choosing and etc
Able to play the voice files chosen by the host, and also able to choose the files that stored in the host for play
Host override function available, able to paging to other zones from this terminal, can also accept paging from other zones and the override of host emergency broadcast
With remote control
Equipped with screen protection function, for energy saving

Description
The network PA system on-demand terminal MAG6402 is a touch panel with luxurious design and TFT true color screen display. It is equipped with the basic operation function of the host, including sound source choosing and etc. It is able to play the voice files chosen by the host, and also able to choose the files that stored in the host for play. With remote control, it is easy and convenient to install and use for many places.

Specification

Item

Index

Input Voltage

DC24V

Input Current(24V)

≤100mA

Power Consumption

≤3W

Standby Power Consumption

≤1.5W

Infrared Ray Control Distance

≥10M

Line Transmission Distance

≥300M

Data Interface

RS485

Functions

Play Mode, Volume Control, Zone On/Off, File Selection, Screen Calibration, Paging, etc

Display Screen

320*240 3.2inch True Color Screen

Dimension(mm)

86×86×10(Base not included)

Net Weight

110g(Including Installation Box)

11.jpg

Connection between the On-demand terminal and the Network Play Terminal:
The On-demand terminal and the Output only terminal can be connected by the network cable. The network cable and the eight core cable should be connected as below:

22.jpg

The connection is shown as above.
Attention: The third foot of Terminal No.1 should be connected with a brown-white network cable, and the fourth foot should be connected with brown network cable. The third foot of Terminal No.2 should be connected to a blue and a blue-white network cable; the fourth foot of Terminal No.2 should be connected with a orange and a orange-white network cable.

Instructions: After install the installation box inside the wall, please install the fixed accessory of the remote controller on the box. As the accessory is fixed on the box from the bottom by screws, please make sure that the two screw holes should be align with the bottom edge of the box.

33.jpg

Installation
Installation Steps:
Step one: Connect with the host.
Step two: Finish the installation of the box follow below picture.

44.jpg


Related Products