Leading Manufacturer for PA/VA System

www.dsppatech.com

E-mail: info@dsppa.com

Search

Wireless Control IP Network Terminal

MAG6419 IP Network Terminal with Built in Amplifier
Industrial design;
High-quality and high-grade piano paint panel;
Supports 100 / 1000Mbps self-adaption TCP / IP network transmission protocol;...

Send Inquiry Chat Now

Features
Industrial design;
High-quality and high-grade piano paint panel;
Supports 100 / 1000Mbps self-adaption TCP / IP network transmission protocol;
Can be accessed at any point within the LAN of the network PA system; the installation position is flexible and facilitated receiving wireless receiving signal and the control is more reliable and stable;
Built-in wireless remote control receiving module, high sensitivity of receiving;
Far transmission distance of wireless remote control , open space> 1.5 km;
Wireless remote control integrated 12 keys, you can customize the corresponding function keys;
Can control the region to play a specific source, the region to stop playing, select the zone to play a specific source, select the zone to stop and other operations.

Description
MAG6419 network wireless remote control terminal is consisted of MAG6419A network PA terminal and MAG6419B wireless remote control receiver module and wireless remote control. Applicable to our network intelligent PA system, it can realize wireless radio control within 1.5km in an open area (such as the school playground or large square).
Networked wireless remote control terminal set the function which has been pre-edited in the host to the 12 control buttons of the wireless remote control through MAG6419 device and receiving module, and then operate the wireless remote control to implement corresponding functional tasks when necessary. The wireless remote control can switch the function task and adjust the volume of the function task that is being executed in real time.It is operated flexibly and easy to use.

Specification

MAG6419

Specfication

Digital interface

RS485

Cable

Stretch (remote control) / sucker antenna (receive box)

Working tempurature

-20℃~50℃

Environment humidity

≤90%

Power supply voltage

MAG6419A

AC220V-240V

MAG6419B

DC16V-30V

Standby current

≤50mA

Maximu current

≤100mA

Receive module

Superheterodyne mode

Receive frequency

315MHz

Receive sensitivity

≤-114dBm (50Ω)

Controllable distance

With obstacles

<500m(Such as within urban buildings)

Without obstacles

<1500m(Such as within playground and square)

Receive belt width

2MHz

Receive rate

<5Kbps (315MHz, -95dBm)

Package(L×W×H mm)

MAG6419A

330×270×125

MAG6419B

215×205×80

Dimensions(L×W×H mm)

MAG6419A

222×195×49.5

MAG6419B

86×86×45

Net weight

1.55kg

Front panel

11.jpg

1. Digital screen and infrared remote control receiving window
The digital screen shows the working and network information status of the machine. In the upper right corner of the screen is embedded infrared remote control receiving window, with it can control the state of the machine..
2. STBY
Standby function indicator, equivalent to mute function, can be opened by network alarm and emergency signal. That is, the alarm and emergency signals can unmute.
3. Net Service
This indicator is on when the unit is connected to the host via network.
4. Timing
The terminal can execute a scheduled timing on the host when disconnected from it. This indicator lights when the terminal is able to disengage from the host and execute the timing point.
5. Signal
This indicator lights when the terminal amplifier has a signal output. The indicator becomes bright gradually when the volume of the amplifier is gradually increased; the indicator becomes dark gradually when the volume is gradually reduced.
6. Screws fixing holes
The terminal can be installed in a similar location such as the wall. There are 4 fixing screw holes on the machine, and the machine is fixed on the wall with the supplied screws.
7. Play/pause button
This button is used to play / pause operations when playing a local MP3 file; this button is used to save the result of the set-up operation when the address setting operation is performed.
8. USB button
U disk play / stop button; in the address setting operation, press the button to exit the setting state.
9. 44.jpgbutton
Play mode: Select the previous song play function.
Set the IP mode: move one screen left / left one, select the view / set parameters
10. F1 button
This button is used to adjust the volume, and can switch among three sources in the auxiliary input, microphone input, MP3 playback volume.
11. Set
Long press the button to enter the IP address view status, and then press once to enter the IP settings state.
12. 55.jpgbutton
Play mode: Select the previous song play function.
Set the IP mode: move one screen right / right one, select the view / set parameters
13. VOL+button
Playback mode: Volume increase function.
View IP Mode: Switch to select parameters.
Set the IP mode: parameter addition and subtraction function.
14. VOL-button
Playback mode: Volume decrease function.
View IP Mode: Switch to select parameters.
Set the IP mode: parameter addition and subtraction function.

Side panel

22_副本.jpg

1. LAN 1/LAN 2
The machine is a dual network interface design, connected to the network switch
2. USB disk
Insert a U disk or a memory device such as a mobile hard disk on which the MP3 program is connected, and provide the audio source to the built-in MP3 player.
3. Micro SD
Insert the SD card with the host timing at the jack, and play the audio source to the host when the terminal is offline.
4. AUX in
Connect audio source devices(such as DVD) to extend the audio source.
5. Wireless receiving module interface
Connect the wireless receiving module with an 8-pin cable, and refer to the connection instructions section of the MAG6419B.
6. M1C1 pickup window
Can be directly released voice broadcast through the built-in microphone pickup window.
7. Microphone silence adjustment
M1C1 silence depth adjustment knob.
8. Speaker
Built-in 2 x 25W digital amplifier, the output of the power is 25W and connect two fixed resistance (4Ω) speakers respectively. It can also be bridged into a single channel mode 50W, but it has to connect the 8Ω speaker.
9. EMC override play output
The output signal of this interface is controlled by host.
10. AUX out
Connect other amplifiers to extend the power of this terminal.
11. M1C2 interface
Connect the microphone to realize local paging or live speech and other functions.
12. AC220V power line
Supply power for the unit.
13. Amplifier cooling window
14. POWER
Press "I" to turn on the power and release "I" to turn off the power.


Related Products