Leading Manufacturer for PA/VA System

www.dsppatech.com

E-mail: info@dsppa.com

Search

350W Mixer Amplifier

MP1000PIII 350W Mixer Amplifier With 3 Mic & 2 AUX Inputs
70V, 100V & 4-16 Ω, rated power 350W
3 microphone inputs, Mic 1 with priority and muting function
2 aux line input &1 line output for additional mixer or amplifier link

Send Inquiry Chat Now

Features

70V, 100V & 4-16 Ω, rated power 350W

3 microphone inputs, Mic 1 with priority and muting function

2 aux line input &1 line output for additional mixer or amplifier link

Individual volume control for each microphone and line input

Bass and treble control.


Description

MP1000PIII economy mixer amplifier is rated at 350W. It has 3 microphone inputs and 2 aux inputs, and Mic 1 is provided with priority and muting function. Bass and treble controls and master volume control are provided. Complete protection includes short circuit and thermal protection, current limiter and overloading.


Specification

Model

MP1000PIII

Rated output

350W

Speaker output

70V, 100V & 4-16 Ω,

Input sensitivity

Mic2,3 : 600Ω, ≤3mV, unbalanced ;AUX1,2,MIC1 : 10kΩ, ≤300mV

Frequency response

50Hz -16kHz (±3dB)

Distortion

< 1% at 1kHz , 1/3rated output voltage

The ratio of signal to noise

Mic1,2 and 3 : >75dB ;AUX1 and 2 : > 80dB

Protection

AC fuse; DC voltage; overload; short-circuit.

Power requirements

AC 220V-240V/50Hz-60Hz

Power consumption

650W

Outer Packing Size (mm)

(L×W×H)520×430×195

Unit Size (mm)

(L×W×H)420×338×88

Net weight

13.4kg


PRECAUTION OF INSTALLATIOM

1. Do not block ventilation holes.

2. The amplifier should not be placed in any of the areas:

1) with poor ventilation;

2) exposed to direct sunlight;

3) with high ambient temperature or adjacent to heat-generating

equipment;

4) with high humidity or heavy dust;

5) susceptible to vibration.

3. Make sure the power outlet conforms to the plug of the unit.

4. Do not use this unit if the electrical power cord is frayed or broken.

Always operate the unit with the AC ground wire connected to the electrical system’s ground.

5. If an alarm rings after the power has been on and the signal has been fed, there must be an of output short-circuit trouble. In a such case,

please turn the power off. Do not turn on the power again, until the trouble shall be resolved.


PACKING LIST

image004.jpg


Related Products