Leading Manufacturer for PA/VA System

www.dsppatech.com

E-mail: info@dsppa.com

Search

6 Zones Amplifier

MP610P 6 Zones Mixer Amplifier With 2 Mic & 3 AUX
Rated power is 250W with 6 zones
2 Mic inputs, Mic 1 with priority and muting function
3 AUX line inputs & 1 AUX line output for power extension

Send Inquiry Chat Now

Features

Rated power is 250W with 6 zones

2 Mic inputs, Mic 1 with priority and muting function

3 AUX line inputs & 1 AUX line output for power extension

Each AUX & Mic input with individual volume control

100V & 4-16Ω optional speaker output for different uses


Description

This mixing amplifier has 6 zones selector, and each zone has its individual volume control. Rated at 250W, it has 2 unbalanced microphones inputs and 3 aux inputs. Bass and treble controls and master volume control are provided.

This amplifier can be applied to different cases, such as supermarket, classroom, etc.


Specification

Model

MP610P

Rated output

250W

Speaker output

100V & 4-16 Ω,

Input sensitivity

Mic less than 3.5mV line less than 300mV

Frequency response

80Hz -16kHz (±3dB)

Distortion

Less than 0.5% (1khz,normal working station)

Protection

AC fuse; DC voltage; overload; short-circuit.

Power requirements

AC 220V/50Hz

Power consumption

500W

Rated output

250W

Outer Packing Size (mm)

(L×W×H)555×455×185

Unit Size (mm)

(L×W×H)484×355×88

Gross weight

16kg

Net weight

14kg


PRECAUTION OF INSTALLATION

1.Do not block ventilation holes.

2.The amplifier should not be placed in any of the areas:

1)with poor ventilation;

2)exposed to direct sunlight;

3)with high ambient temperature or adjacent to heat-generating equipment;

4)with high humidity or heavy dust;

5)susceptible to vibration.

3.Make sure the power outlet conforms to the plug of the unit.

4.Do not use this unit if the electrical power cord is frayed or broken.

5.Always operate the unit with the ground wire

6.If a short alarm rings after turning on power and inputting signals, there must be an output short circuit fault. In such case, power should be cut off immediately. Do not turn on the power until the fault is removed.


Related Products