Leading Manufacturer for PA/VA System

www.dsppatech.com

E-mail: info@dsppa.com

Search

6 Zones Mixer Amplifier

MP210P 6 Zones Mixer Amplifier With 2 Mic & 3 AUX
This amplifier with rated power 60W
2 Mic inputs, Mic 1 with priority and muting function
3 AUX line inputs & 1 AUX line output for power extension

Send Inquiry Chat Now

Features

This amplifier with rated power 60W

2 Mic inputs, Mic 1 with priority and muting function

3 AUX line inputs & 1 AUX line output for power extension

Each AUX & Mic & speaker zone with individual volume control

With bass and treble tone control for speaker output

Built-in chime for speech/ paging notification

100V & 4-16Ω optional speaker output for different uses


Description

This mixing amplifier has 6 zones selector, and each zone has its individual volume control. Rated at 60W, it has 2 unbalanced microphones inputs and 3 aux inputs. Bass and treble controls and master volume control are provided.

This amplifier can be applied to different cases, such as supermarket, classroom, etc.


Specification

Model

MP210P

Rated output

60W

Speaker output

100V & 4-16 Ω,

Input sensitivity

Mic less than 3.5mV line less than 300mV

Frequency response

80Hz -16kHz (±3dB)

Distortion

Less than 0.5% (1khz,normal working station)

Protection

AC fuse; DC voltage; overload; short-circuit.

Power requirements

AC 220V/50Hz

Power consumption

120W

Rated output

60W

Outer Packing Size (mm)

(L×W×H)555×455×185

Unit Size (mm)

(L×W×H)484×355×88

Gross weight

11.5kg

Net weight

10kg


FRONT PANEL

image006.jpg

1.Power Switch

2.LED Power Indicator

3.Bass Adjustment Button

4.Treble Adjustment Button

5.Line Input Volume Adjustment Button

6.MIC Input Volume Adjustment Button

7.MIC 1 Priority Input Jack

8.Zone Volume Adjustment Button (1-6)

9.Zone Level Indicator

10.Chime Button

11.Five-unit LED Level Meter


Note:

When all five units of the LED level meter remain lit, it indicates that the sound is distorted. In such case, adjusting each volume adjustment button until LED unit 4 (+8dB) and LED unit 5 (+10dB) flash.


REAR PANEL

image008.jpg

1.Mute control Button

2.MIC 2 Input Jack

3.AUX Input Jack 1, 2, 3

4.AUX Output Jack

(Link with another amplifier or recording equipment)

5.6-zone Output

6.AC Power Source Insert

7.Fan Exhaust Window

8.AC Power Fuse

9.Speaker Output Terminal

10.MIC4 Input Jack

11.MIC3 Input Jack

12.Microphone and phantom power supply switching key

13.MIC4 Input Volume Button

14.MIC3 Input Volume Button


PRECAUTION OF INSTALLATION

1.Do not block ventilation holes.

2.The amplifier should not be placed in any of the areas:

1)with poor ventilation;

2)exposed to direct sunlight;

3)with high ambient temperature or adjacent to heat-generating equipment;

4)with high humidity or heavy dust;

5)susceptible to vibration.

3.Make sure the power outlet conforms to the plug of the unit.

4.Do not use this unit if the electrical power cord is frayed or broken.

5.Always operate the unit with the ground wire

6.If a short alarm rings after turning on power and inputting signals, there must be an output short circuit fault. In such case, power should be cut off immediately. Do not turn on the power until the fault is removed.


Packing List

NO.

List

Quantity

1

Zone preamplifier

1 set

2

Warranty Card

1 copy

3

Certificate

1 copy

4

Manual

1 copy

5

Charter Washers

4 pcs

6

White 5x19 half countersunk head cross machine Wire

4 pcs

7

10A GB mp-p Power cord

1 pc

8

1500mm/Double Cat Audio Cable

1 pc

Related Products