Leading Manufacturer for PA/VA System


E-mail: info@dsppa.com

Guangzhou DSPPA Audio Co.,Ltd


60W Mixer PA Amplifier

MP200PIII 60W Mixer Amplifier With 3 Mic & 2 AUX Inputs
70V, 100V & 4-16 Ω with rated power 60W
3 Mic inputs, Mic 1 with priority and muting function
2 AUX line input &1 line output for additional mixer or amplifier link

Send InquiryChat Now


70V, 100V & 4-16 Ω with rated power 60W

3 Mic inputs, Mic 1 with priority and muting function

2 AUX line input &1 line output for additional mixer or amplifier link

Individual volume control for each microphone and line input

Bass and treble control.


MP200PIII mixer amplifier is rated at 60W. It has 3 microphone inputs and 2 aux inputs, and Mic 1with priority and muting function. Bass and treble controls and master volume control are provided. Complete protection includes short circuit and thermal protection, current limiter and overloading.




Rated output


Speaker output

70V, 100V & 4-16 Ω,

Input sensitivity

Mic2,3 : 600Ω, ≤3mV, unbalanced ;AUX1,2,MIC1 : 10kΩ, ≤300mV

Frequency response

50Hz -16kHz (±3dB)


< 1% at 1kHz , 1/3rated output voltage

The ratio of signal to noise

Mic1,2 and 3 : >75dB ;AUX1 and 2 : > 80dB


AC fuse; DC voltage; overload; short-circuit.

Power requirements

AC 220V-240V/50Hz-60Hz

Power consumption


Outer Packing Size (mm)


Unit Size (mm)


Gross weight


Net weight





1 LED power indicator6 Mic volume control

For main power.Adjust microphone volume.

2 LED level meter7 AUX volume control

Indicate output level.Adjust AUX input volume.

3 Power switch  8 Mic 1 input jack

For main power.Connect to microphone of unbalanced

4 Bass control30~600Ω with 1/4″phone plug.

Adjust bass response.The muting function is activated

5 Treble controlwhile the signal is sent to Mic 1.

Adjust treble response.


When all the five elements of the LED level meter remain lit, it indicates that the sound is distorted. In such a case, adjust each volume controlling button, until LED element 4 (+8dB) and LED element 5 (+10dB) shall flash.




1 AC fuse  4 AUX 1 input & AUX 2 input

Prevent the excessive AC current flow.Connect to auxiliary source equipment.

2 AC power connector5 AUX output

Connect to AC power source.Connect to amplifier.

3 Mic 2 input & Mic 3 input 6 Output terminals

Connect to the microphones at unbalanced Connect to speakers.

30~600 Ω with 1/4″phone plug.  7 Mute control

The signals from Mic 2 and Mic 3 willAdjust muting function.

be muted by the signal from Mic1.

文本框: Safety Precautions 1.  Safety Precautions

l  Please do NOT connect this device to the power source, before the system is correctly wired.

l  It is important to ensure that input voltage to the device is the same as required voltage of the device, otherwise the device may be damaged.

l  There is dangerous voltage in the device, which may cause personal electric shock. Please do NOT open the case without permission, to avoid potential risks of electric shock.

l  The device is not completely disconnected from power source when it is switched "OFF". For sake of safety, please disconnect the device from the socket if it is not in use.

l  Please do NOT place the device where it is extremely cold or hot.

l  Good ventilation must be provided in the working environment of the device, to avoid excessive temperature during its operation, which may cause damages to the device.

l  Please unplug the device from power socket in raining and wet days or if the device is not in use for a long time.

l  Please disconnect the power plug from sockets, to ensure the device has been completely disconnected from power source, before any component is removed from or re-installed in the device or before any electric connector of the device is disconnected or reconnected.

l  In case of any failure of the device, please do NOT open the case and repair without permission from a professional personnel, to avoid accident or additional damages to the device.

l  Please do NOT place any corrosive chemicals near or on the device.


2   Matters needing attention

l   Our company provides a three-year free warranty service (including free replacement parts) over quality issues as from the date of purchase, provided that the device is installed and used in accordance with requirements specified in the User Manual.

l   For warranty, the user must show the Warranty Card and the receipt kept by the user and purchase invoice of the device as supporting documents.

l   The following conditions are beyond the scope of warranty:

1.Product damage due to improper installation, use or handling;

2.Product damage due to abnormal conditions (such as excessive power source voltage or ambient humidity);

3.Product damage due to acts of God;

4.Product SN is changed, altered or removed;

5.Product has been repaired or modified by any person without duly authorization from our company;

l   Please keep the User Manual and Warranty Card in good custody.

l   In case of any failure in the warranty period, please contact service personnel (or distributor) of our company for service. The company shall not be made liable for damages due to unauthorized dis-assembly or maintenance or service by unauthorized personnel.


Packing List





SY542 connectorsAV Audio line




Output Insurance Box



Mains Line



Warranty Card






User’s Manual


Related Products