Leading Manufacturer for PA/VA System

www.dsppatech.com

E-mail: info@dsppa.com

Search

300W Line Array Speaker

LA1512S 300W Line Array Speaker
Small cubage,lightweight, high SPL and high sensitivity;
Variable curvature vertical (0-30 degrees) or modular, constant curvature horizontal array;

Send Inquiry Chat Now

Features

Small cubage,lightweight, high SPL and high sensitivity;

Variable curvature vertical (0-30 degrees) or modular, constant curvature horizontal array;

The array has multi angles to adjust the position of array in vertical;

Multi install modes like wall mount, overhead etc., suitable for outdoor and indoor use.


Specification

Frequency Range (-10 dB)

100 Hz-40, 000 Hz

Frequency Response (±3 dB)

150 Hz-20, 000 Hz

Sensitivity(1m,1W)

97 dB

Max. SPL (1m)

122 dB/128 dB (Peak)

Input Voltage

AC100V of Amplifier

System Input Power Rating

400W Continuous, 1600W Peak (AES/2 hour)
300W Continuous, 1200W Peak (100 hour)

Horizontal Coverage Angle (-6dB)

120 degrees nominal (averaged 100 Hz-20, 000 Hz)

Vertical Coverage Angle (-6dB)

Defined by the array size and configuration

Transducers

4′woofer ×8(low & mid frequency)
58 mm×14 mm ribbon tweeter × 4 (high frequency)

Grille

Aluminum Alloy

Bracket Supporting Weight of LA1511S

100kg

Bracket Supporting Weight of LA1511B

200kg

Environment Temperature

-10℃~+40℃

Dimensions (L×D×H)

490 mm×228 mm×580 mm

Net Weight

33.5 kg (74.4 lbs)

Gross Weight

35.7 kg (79.3 lbs)


Installation

Installation Mode 1: Combining With LA1511B In One Group

TIM截图20180427102624.jpg


Adjusting Angle

Loosen “Connecting pole 1”, adjust the angle according to the attachment holes (2、4、6、8、10、12 degrees) on the pole and connect them by M5 screws.


Installation Mode 2: Combining With LA1511S’s frame on 1511S’s extension rod

TIM截图20180427102431.jpg

If you choose this mode, LA1511S’s frame will be combined before it is transporting.

(1)Open the box and take out LA1511S and accessories.

(2)Install LA1511S (combined with bracket) on the LA1511S’s extension rod by M6 screws.

(3)Adjust the position and examine whether it is steady.

Adjusting Angle

It is the same as Installation Mode 1.


Installation Mode 3: Combining With LA1511B In Two Groups

TIM截图20180427102745.jpg

(1) Open the box and take out LA1511S, LA1511B and accessories.

(2) Install hanging ring on the array frame.

(3) Connect two LA1511B by M5 screws.

(4) Insert M5 screws from LA1511B’s bottom hole to LA1511S’s top hole and fix up.

(5) Use “connecting pole 2” to connect LA1511S’s top U slot and LA1511B’s bottom U slot by M5 screws.

(6) Adjust the position and examine whether it is steady.

Adjusting Angle

The difference between Installation Mode 1 & 3 is Mode 3 has more angles to adjust. Others are the same as Installation Mode 1.


Related Products