Leading Manufacturer for PA/VA System

www.dsppatech.com

E-mail: info@dsppa.com

Search

POE Speaker

POE6463 POE Powered Network Wall Mount Speaker
100/10Mbps, TCP/IP network transmission protocol adaptive
High class waterproof grille, engineering plastic mold design
Built-in 10W high efficiency digital amplifier with low power-consuming.

Send Inquiry Chat Now

Features

100/10Mbps, TCP/IP network transmission protocol adaptive

High class waterproof grille, engineering plastic mold design

Built-in 10W high efficiency digital amplifier with low power-consuming.

Audio source includes: Background music, emergency call, and alarm from the Host

1 auxiliary audio input, 1 auxiliary audio output and 1 microphone input

100V local emergency input, easy to connect with the local fire alarming system

Accept infrared remote control

POE power supply, easy for installation and cable laying


Description

POE6463B is a network full digital signal processor Hi-Fi speaker based on TCP/IP protocol. With dual network interface design, it can be connect to anywhere the network reaches. Under intelligent control of the system center, this terminal serves to output the long distance audio data flow.Built in MP3 player, USB port, and SD slot, for local program playing.With 1 aux input to connect with other audio source equipment; 1 aux audio output for connection with other amplifiers for power extension; and 1 MIC input for local Paging.


Specification

Item

Technical specifications

AUX input

Input impedance

>10kΩ

Input sensitivity

1000 mV

Frequency response

50Hz-20kHz

Distortion

≤0.1%

Signal-to-noise ratio

≥80 dB

MIC input

Input impedance

>600Ω

Frequency response

50Hz-20kHz

Distortion

≤1%

Signal-to-noise ratio

≥75 dB

AUX output

Output impedance

<50Ω

Output sensitivity

1000mV

Frequency response

50Hz-20kHz

Distortion

≤0.1%

Signal-to-noise ratio

≥75 dB

Power amplifier output

Power

10W/4Ω

Frequency response

50Hz-20kHz

Distortion

≤0. 1%

Signal-to-noise ratio

≥80dB

Built-in amplifier

Digital amplifier

1x10W

Built-in speaker

Maximum sound pressure level

≥100dB

Power

10W/4Ω

Frequency response

50Hz-20kHz

Distortion

≤0. 1%

Signal-to-noise ratio

≥80dB

Interface

Dual Ethernet interface

CAT-5

AUX input

RCA jack

AUX output

RCA jack

MIC input

6.3 Socket

Auxiliary speaker output

3.81MM Phoenix socket

Digital audio parameters

Decoding format

Support PCM\MP3 format

Sampling rate

8k-48kHz

Package size (L×W×H mm)

590×275×390

Machine size (L×W×H mm)

310×215×150

Net weight

4.2kg


II. Introduction of functions

TIM截图20180427184615.jpg

1. Speaker

1×10W digital power amplifiers are built in the machine, and the power of the output port is 10W. It is used to connect 1 constant resistance (4Ω) sound box. (Note: please use it with caution due to POE switch supply power restrictions)

2 100V audio input interface (not opened to the machine)

100V audio signal connected with the third party system power amplifier.

3 Auxiliary input interface (AUX IN)

Expand the local audio source input, and can connect local DVD \ radio and other left and right sound channel output.

4 Auxiliary output interface (AUX OUT)

Connect with the high power amplifier, so as to expand the terminal power.

5 LED matrix screen connecting port

(Not opened to the machine)

6 POE power supply port

The arrow points at POE power supply port. The function of the next network interface is not opened temporarily.

III. Connection legend

3.1 Schematic diagram of application of POE6463 in the system

TIM截图20180427184639.jpg

1. Only the schematic description for connection of rough application of POE6463 networked speaker is made in the above figure. For connection of the whole system, please refer to operation instructions for the networked control host.

2. It is illustrated by examples in the above figure. For specific connections, please refer to the schematic diagram of system connection.

3. POE6463 must be connected in the system through the network switch, and the corresponding address shall be arranged for connection with the host machine.

3.2 Schematic diagram of connection of interface of POE6463

Except for playing the program of host machine broadcast, the machine is also provided with a way auxiliary input and a way auxiliary output, so as to connect other audio sources and power amplifiers. The customized design can satisfy demands for high power and multiple audio sources on terminal site. The peripheral audio source and other power amplifiers can be connected in the application with individual demands. The network audio stream of the machine can realize sound amplification at most public places.

The schematic diagram of interface connection of the machine is shown in the following figure:

TIM截图20180427184651.jpg


Related Products