Leading Manufacturer for PA/VA System

www.dsppatech.com

E-mail: info@dsppa.com

Search

Speaker Volume Controller

Speaker Volume Controller

MP2005A Volume Controller with Built-in Amplifier
Remote Amplifier Volume Controller
Rated output 5W/4Ω (distortion 10%)
Output sensitivity: 10kΩ, 300mV (±10%), unbalanced
Provided with power switch, capable of independent control of volume

Send Inquiry Chat Now

Features
Remote Amplifier Volume Controller
Rated output 5W/4Ω (distortion 10%)
Output sensitivity: 10kΩ, 300mV (±10%), unbalanced
Provided with power switch, capable of independent control of volume

Specification

Model

MP2005A

Rated output

5W/4Ω (distortion 10%)

Output sensitivity

10kΩ, 300mV (±10%), unbalanced

Frequency response

80Hz-18kHz (±3dB)

Harmonic distortion

<1% (1kHz, 1/3 rated output voltage)

Signal to noise

> 70dB

Protection

AC fuse, short circuit protection

Power supply

AC220-240V/50Hz

Power consumption

8W

Size of panel (L×W×H)

86×86×68mm

Installation size of base box (L×W×H)

78×78×50mm

Net weight

0.2kg

How to install:
1. Connect the signal input line with the sound source (white represents hot signal end), connect the power output line with the speaker (red +, black -), and connect power line with AC 220V power supply in a safe manner (see figure below);
Warning: It is prohibited to connect AC220V power supply to signal input line or power output line!

11.jpg

2. Apply force outwards from the buckling position at the main body of the part to take off from the face frame;
3. After checking the lines for perfect connection, push the main body of part carefully into installation base box, lock up with screws, buckle face frame;
4. Turn volume knob to adjust the volume as required. In case of long-term idling, please turn volume knob to “OFF”, to shut off the power supply.


Related Products